Michael Storer Boat Design

Home

Steam Canoe - one off classic design


Length - 7.6m (24ft)
Beam -  1.4m (4ft 8ins)
Construction - Western Red Cedar Strip planking, American Oak trim.
Article and Newspaper image from Adelaide Messenger Press


"What is it?"  I've never seen anything like it before," the German tourist said.

Standing in front of onlookers he - and everyone else - was bemused by the strange craft bobbing on the River Murray at Mannum.



Few Australians are ever likely to have seen anything like the SC (steam canoe) Charlie.  Steam Canoes plied the River Thames in Britain from the 1890s to the 1930s.  Known as "Edwardian" canoes, they were used as tenders and workboats.  Fewer than five original canoes are now operable in the UK and some are electric powered.

City tyre dealer Mr Roger Baker, 48, of North Haven, and his family yesterday slipped SC Charlie from its specially-built trailer for its maiden voyage.

Charlie's evolution began in 1993 as nothing more than Mr Baker's dream.  The keen yachtsman thought about building a yacht or motor launch, but he wanted to create something unique.  His inspiration cam with the chance discovery of a wooden boat calendar featuring an original canoe.

The more Mr Baker studied the small calendar photograph, the more the idea tantalised him.  When he told his family they were incredulous.  But yesterday Karen, 37, and James, 9, beamed with pride.



The project was never going to be simple and he had an immediate setback when the British Maritime Museum said plans for a steam canoe no longer existed.  But a marine architect (Michael Storer Design) came to the rescue, computer-enhancing the photograph to produce the design.

The American Oak hull gradually took shape, but not without the odd mishap.  Early in the process the wood shrank during excessively hot weather, causing the hull to "implode" (actual curl up inwards as moisture was lost  from the unsealed internal faces - MIK).



Finally the exquisitely-finished, sleek 7.6m by 1.4m hull slipped into the Murray River to the applause of family and well-wishers.  The obligatory bottle of champagne was poured rather than smashed over the upturned bow - for fear of damaging the woodwork.

"Fantastic, just unvelievably fantastic," an excited Mr Baker roared as Charlie built up a head of steam.

"At that rate we'll be able to waterski behind it ... just kidding," Mrs Baker said.

Only last week the hand -built "compound steam" engine, constructed by retired marine engineer Mr Dick Lambert, was fired up for the first time.

Charlie carries three people and will be used as a pleasure craft as well as be exhibited at boat and steam engine shows.



Michael Storer Boat Design can put together a hullshape for your project. 

The price for the development of the Steam Canoe was around $300 for a hullshape - the temporary mold shapes are printed out full size) as well as a construction cross-section (which gives the sizing and location of the timber structure, fibreglass etc).  This assumes like Roger Baker you can work out the details for installing the engine, propeller shaft etc.

Of course it is also possible to fit a small inboard engine or electric motor and batteries.

We can work other details out for you, but of course it adds extra cost.

We don't automatically take on any project of this type, but when the boat is something special and the builder is clear about what they want and know how to fill in the details we can get quite excited too!!


Home image linking to 100 Top Boating Sites
View My Stats