lightweight simple plywood SUP - stand up Paddleboard - storerboatplans.com

FAQ – Getting a hull smooth – Torture Boards for strip planking and decks

Torture boards are used for the highest grade of smoothing for visual smoothness of the whole structure. Fairing a strip planked hull.
Fairing a join between adjacent plywood sheets in a hull or deck.
Fairing a composite structure
Fairing deck substructure. Deckframes and deck stringers ready to take plywood.

The Canon – Tools for thinking about sailing and boat design – Books and Articles

One of the most important things as a designer or sailor is to keep an open mind, but also to be able to analyze things in light of real experience and prior knowledge. These are online and paper resources that force thinking in different ways.

This article, after a bit of a spiel, goes on to give some great resources that “opened my eyes” at different times in my life.

They focus on areas of structural design, sailing, sail aerodynamics and touch on a bit more.

Minimal repairs to keep an old Mirror plywood sailing dinghy going

Melanie in the UK wrote to me. She has just bought an old Mirror dinghy and started sailing for the first time.

Problem is that the boat leaks and she doesn’t want to stop using the boat until the end of the season.

I have a philosophy of keeping older boats on the water and not pulling them off for months on end until you have the time to do the job.

So the article here is useful to see what can be done with an old leaky plywood sailing dinghy to keep it going.

It is perfect sailing weather at the moment in the UK and it is better she is out there learning but with the worst of the leaks gone.

With a disciplined approach she should be able to get all of this done in a week or so. The general leaks fixed permanently and the rotted area reinforced so that the boat won’t break.

Podcast Online – Wooden Boat Construction by Michael Storer – 2 of 3

This is the second of my talks in the USA. It focuses a bit more on construction and some of the methods that can be used to keep a boat light and simple, but very strong and stiff.

It also discusses how there is a “creep” in boatbuilding and design that increases the weight of boats way over what is really needed for a strong structure.