Archives for;

Rigging

Fenwick Williams Catboat built in cedar strip at DuckFlat Wooden Boats Australia. detail design work by storerboatplans.com

How we Strip Planked a Fenwick Williams Catboat

A Fenwick Williams catboat carefully reinterpreted in Cedar Strip. Includes cleaner structure, optimised foils and a tabernacle rig that allows raising of the mast by one person. Built by David Wilson at Duck Flat Wooden Boats in Adelaide.
0
Goat Island Skiff lug rig setup and tuning: storerboatplans.com

How to rig efficient lug sails – Goat Island Skiff

How do you rig your Goat Island Skiff or other balance lug rigged boat? This page will be useful for everyone, but specifically assist Goat owners in selection of rope, rope lengths and show all the rigging details. We have also found a number of cheaper ways of doing things from our experience in the Philippines. Halyard, downhaul, outhaul, lashings, rope fittings, rudders, centreboard.
0
Sabre plywood dinghy. Make one yourself. storerboatplans.com

Q&A How to Race a Dinghy Successfully the Low Stress Way.

Racing shows that what you know is what you know. It doesn’t matter if the boat is less than perfect. So where is it best to put in the effort to improve results. Boat setup, knowing how to adjust for different wind conditions, practicing skills until they become automatic, sailing as much as possible … and teaching others.
0
birdsmouth masts. storerboatplans.com

FAQ Birdsmouth masts – butt joins OK? Scarfs are recommended.

[Translate] Birdsmouth masts are a really neat method of making a hollow round or elliptical mast. The mast is made of staves which have a 90 degree notch cut out of the stave’s side with a router or using a table saw. For a round mast, identical staves are made up then held together with […]
0
Rigging sailing boats made cheaper. storerboatplans.com

Cheaper Set up for Lug Rig – eliminate fittings but still sail fast

[Translate] This is a reprint of an article from the OzGoose website with a preamble by me and some reorganisation to make it more useful to owners of other boats. As you may now we are one of the main developers of the knowledgebase for lug rigs, setup, rigging, control and performance. See the list […]
0

Reefing a balance lug sail

How to reef a Balance Lugsail. A neat trick of using shock cord (bungee) for the intermediate ties makes it much faster to tie in a reef as well as remove the reef after. it also minimises the risk of damaging the sail if something major breaks elsewhere.
2

Mark Milam’s gorgeous wooden Duck – an OzRacer RV sailboat

The OzRacer RV sailboat is meant to be a very simple boat that can be homebuilt.Most build it to get on the water quickly, but Mark Milam has done an amazing job of overseeing a project combining his work with that of a boatbuilder friend.Wonderful woods, some great detail design and the very best fitting of a windsurfer rig to a dinghy that I have ever seen.
0