Goat Island Skiff Launching 2 – Woodeneye in the Hunter Valley, NSW.

Goat Island Skiff Boat plan info

Bruce (Woodeneye on the OZ woodwork forum has launched his Goat Island Skiff.  Its name is Shesha.

This is Bruce’s report.

We launched today! What a great day it turned out to be.

The day dawned with a heavy fog but by 8am it had cleared with a fresh breeze blowing in from the west. Our GIS had been trailered up the previous day and already hitched to the car, so all we had to do was jump in and take off.

We arrived at Taylors Beach (Port Stephens NSW) to be greeted with a fresh south westerly of approximately 20 knots, so I decided that we’d better have a reef tied in for our first sail. Kim’s parents, who had given us a 1948 Australian penny for under the mast, suddenly produced a 35 year old champagne for the christening! Wow, was it good, unlike any champagne I had ever tasted. I’ll post a transcipt of the ceremony in a subsequent post, but we had quite a few intrigued locals over to watch and help.

We named her Hakuna Matata! Means “no worries” in Swahili, and made famous by the song in the Lion King. We had decided a couple of months ago not to call her Shesha, for a number of reasons.

You would never have guessed it was mid winter. 20 deg C, so we didn’t even need our warmies!! The splash was small, and she floated mighty high and we were soon off, lucky to be taking off on a broad reach so we could get over the shallows with just a few cm of board and rudder down. Once out in the deep, we were moving pretty quickly, with Kim sitting on the centre seat on the lee side and me on the gunwale. We cruised up and down, trying out all points of sailing. First impressions are how easily the Goat moves and the quick, unfussed acceleration when a gust comes, but at all times she was comfortable with the two of us and one reef in.

After an hour or so, we were signalled that a hot coffee was awaiting us on the beach so we pulled in. The tide was now fully in so the shallows were no problem any more. What happened next was hilarious. I was holding the boat in knee deep water and as Kim climbed out, a gust of wind hit us. Her foot caught on the sheet, and before we knew it we had managed to capsize her on the shore. Kim fell in and was well and truly dunked, much to the mirth of the gallery on the shore. It was a funny moment.

After bailing all the water out and warmed by a cup of coffee, I ventured out alone, still with one reef in. Kim by now was all rugged rugged up in dry clothes and with her dignity restored, but decided that was enough for one day.

However, the wind had died a bit and was probably down to 15 knots. Still, she was well behaved and I felt quite safe and in control sitting on the gunwale. I even threw in a couple of gybes without a problem. Time now to come in and remove the reef!

No sooner was I out there with full sail, than the wind abated some more to around only 10 knots, with just the occasional gust of about 15 knots to make things interesting. With full sail in this breeze, I really only had to hike out using the hiking straps 4 times as the gusts came through, and then it was down to sitting on the middle seat for the rest of the afternoon as the wind slowly dropped, and I only had an occasional opportunity to perch on the rail from then on.

Bruce has catalogued both the building and the many goatish adventures on his blog

And I mean that in a good way.

There are no photos yet. I will add them when Bruce puts them up. But some detail shots from a week ago …

Shesha, Bruce's Goat Island Skiff sailboat.  Nice woodwork

And the interior

Goat Island Skiff - varnished plywood

Getting her out of the water and trailered up again was made easy with plenty of interested assistance from folks out for the day having barbeques in the park beside the beach. There were no other sailing boats out there that we saw.

Driving home, we had a good laugh again as we remembered Kim’s dunking, which of course was all my fault!

I can’t wait for next weekend, where we’ll be taking her onto Grahamstown Dam, which is a large fresh water reservoir, well known for it’s even breezes due to the low lying topography all around.

Oh, I forgot to mention, the camera took a dunking too when the boat was swamped by Kim’s little episode, and it doesn’t work any more I’ll have to take the card to work tomorrow to get the pics off it. Luckily, it was a a pretty old, hardly used and cheapish 3mp Kodak and not my Fuji.

It was pretty awesome, so I now know how Christophe and John felt last w/e

2 thoughts on “Goat Island Skiff Launching 2 – Woodeneye in the Hunter Valley, NSW.”

  1. I am a recently-retired Aussie currently working as a volunteer for a Christian aid organization in southern Africa.
    One of the objectives we have is to build ‘capacity’ into local communities. This often means giving them skills in industries like building and associated trades. As part of this we run a carpentry shop employing 3 guys who are mainly focussed at the moment on furniture manufacture.
    As a keen sailor I suggested to them that we should build a boat this year and take it sailing on one of the local dams (we are a long way from the coast….)
    When I shared with them in more detail what my idea involved they got very excited and are keen to commence ASAP.
    I was keen on the GIS from the start as I had remembered seeing it in AABB magazine a couple of years or so ago and after reading your story and seeing the beautiful finish you have achieved on your boat I have made up my mind what I want to build!
    I will show my guys these photos, and any more that you could possibly send me, as a challenge and an encouragement.
    Thanks for going to the trouble of posting it on the ‘net.
    Cheers
    Stephen

    Reply

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.