Cliff and PJ live in Warm Queensland and Wintry Tasmania. However they both like to go the the yearly (June) wooden boat festival in tropical Far North Queensland.
This year they decided to build one of my Quick Canoes. They started on Saturday and finished including putting the canoe on the car roof by the following thursday.
They are experienced woodworkers so added some very nice details.
Melanie in the UK wrote to me. She has just bought an old Mirror dinghy and started sailing for the first time.
Problem is that the boat leaks and she doesn’t want to stop using the boat until the end of the season.
I have a philosophy of keeping older boats on the water and not pulling them off for months on end until you have the time to do the job.
So the article here is useful to see what can be done with an old leaky plywood sailing dinghy to keep it going.
It is perfect sailing weather at the moment in the UK and it is better she is out there learning but with the worst of the leaks gone.
With a disciplined approach she should be able to get all of this done in a week or so. The general leaks fixed permanently and the rotted area reinforced so that the boat won’t break.
The plywood “disposable” canoe (see here) has been renamed the more salubrious “Quick Canoe”. I quite liked the name of “Disposable Canoe” but I agreed with the critique that it hinted at something that was poor quality rather than simple and Easy.
It has been designed to be as easy to build as possible while keeping some of the qualities of a good paddling canoe – in particular the ability to track.
This podcast/mp3 talks about why Australian (and New Zealand) wooden boatbuilding is different from the rest of the world..
Click to listen to the talk. This is the third of three.
This is the second of my talks in the USA. It focuses a bit more on construction and some of the methods that can be used to keep a boat light and simple, but very strong and stiff.
It also discusses how there is a “creep” in boatbuilding and design that increases the weight of boats way over what is really needed for a strong structure.
This talk is the first hour of my exposition on boat building and design. There are two more parts to come. This covers some of the background and design issues. The second is more on the building side and the last is a bit more about why the Australian (and New Zealand) wooden boat tradition is different from the Northern Hemisphere.
You can stream the talks over your internet connection or download them as a podcast.
Gluing Endgrain Gluing timber end grain with epoxySee drawing of endgrain right.. The basic problem is that end grain is highly absorbent so it can steal the resin from the join leaving insufficient for good bonding. The trick … is to feed the end grain some mixed resin before the glue mix is put on read more →
There are huge advantages in keeping the epoxy at a slightly raised temperature. * It flows out better onto the work * It mixes easier * The curing kicks off faster in cold weather (and the box can easily only be turned on when needed. There are huge advantages in keeping the epoxy at a read more →
There was the suggestion that very coarse sandpaper was the best to use on a timber surface to ensure good bonding when gluing or fiberglassing the surface. This is not recommended – the following explains why. There was the suggestion that very coarse sandpaper was the best to use on a timber surface to ensure read more → This is a problem most of use come up against at least once. However it is unlikely to happen a second time. Richard wrote to me asking why his epoxy was still soft 3 days later. He suggested it might be because of one of: 1. The immediate guess is that it’s been too cold read more → There are two tricks to sikaflexing between strips. Use the Sika Primer – it improves the bond strength to the timber for a permanent job. You can get away without it often, but it changes the situation from a fairly strong bond to a hugely strong bond (you’ll know this if you have ever removed read more →
Most people know about using Cordless Drills to drive screws into timber now, but I remember when it was new and exciting! Here’s my spiel from my plans sets Cordless Battery Drill with Clutch. A marriage made in heaven. The drill can be battery (most convenient) or mains powered. It is best if it has read more → Paint vs Varnish Paint is more durable and will protect the epoxy and timber the best. Varnish hides a rough surface better. If you have done a rough job the timber grain will hide it. Make sure the varnish contains ultra-violet filters. Us My usual plan is to varnish the inside of open boats and read more → There are a number of labour and materials saving techniques that are applicable when using epoxy. Contents of this section Wet-on-Wet Coating and Dewaxing Cured Epoxy. Building strong lightweight boats – a note on the use of epoxy One Hit coating and gluing Wet-on-Wet Coating and Dewaxing Cured Epoxy. As epoxy cures some of the read more →
The two methods here save a lot of mess when building boats with epoxy. They also allow accurate and fast placement of mixed epoxy glue. Most supermarkets have varieties of “snap lock” bags. They have a seal across the opening of the bag that can be pressed together with finger pressure. They make it a read more →
Fiberglassing larger areas is done differently from small. Large areas require that the glass be draped dry over the surface then the epoxy is applied over the glass and worked through the surface. The example here is glassing a centreboard but the principle is the same for much bigger areas like the bottoms, sides and read more →
This is the normal method for fibreglassing small areas – typically using fibreglass tape to hull seams. Here I document the process of coating the hull and glasstaping the chines in one hit. Integration of different steps in this way is one of the major efficiencies of modern epoxy boatbuilding. However if simply glass taping read more → Most quality boatbuilding epoxy manufacturers have a structural boatbuilding product. They normally are “high solids” boatbuilding epoxies that have uneven resin to hardener ratios (2:1, 3:1, 4:1 or 5:1) which you have to add powder to make a glue or filleting mix The same companies often produce pregelled products that are mixed in a 1:1 read more →
English