Gyula, who built the first European OzRacer in 2008 wants to modify it for an outboard motor.
This modification will work for most OzRacers, Oz Goose, PDGoose and PDRacers.
Finally I finished the plan for the new OzRacer RV. It is a much simpler build of the original OzRacer concept so will be very attractive to people looking for a first boat. Plans are still the old $20 but even more detail than before. Order the plans for the simple and cheap OzRacer RV read more →
The OzRacer Mk3 has been rebranded as the OzRacer RV.
Detailed plan – a boatbuilding course in a book for $20 each.
So now racing sailors can use the OzRacer Mk2 and cruising sailors can use the OzRacer RV plan. The RV is no slouch though – it won the World titles in 2010.
For the Goose – a first sailing report in moderate winds – and it works.
Also a free plan for a ketch/yawl version, and …
… Michael goes on a bit about the real differences between a ketch and a yawl
First detailed sailing report of the Goose 12ft sailboat.
The Oz Goose is a 12ft sailboat derived from the smaller OzRacer/PDRacer/Brick line. It uses all the same running gear as the OzRacer.
Jim Post has built the hull of his PD Goose – a 12ft version of the OZ PDRacer.
He has done a nice job with a couple of nice additions. A seat in the middle and a stylishly angular splashboard on the foredeck. I am dying to hear how it sails!
OZ Racer plan information The PDRacers have a saga published at Duckworks about the Texas 200 (the 200 mile sailing event up the Texas Coast). It is not by a Ducker but by one impressed by them. Extract The Mighty Ducks clung to the port, with all manner and various sort of other craft abeam read more →
A nice little article by Jackie Monies who is turning into the writer in residence for the PDRacers.
It posits the idea that because of its cheapness, ease of building and the creativity in the group that it qualifies as the “All American Boat”.
Actually I think it is the perfect boat for places that are water rich and cash poor. Anyone can afford to go sailing in these cool little sailing boats. The options of material and design solutions allow the boats to be built of local material just about anywhere. Very cheaply.
From Al Zuger in Brooklyn, NY who is extending the envelope of operating his PDRacer. So I finally took my little ducky out in a real bay yesterday. I went down to the south shore of long island about an hour out of the big city, and man was it ever nice! Up until now read more →
At the moment I am in Sydney for a couple of weeks. Not a lot of boating stuff happening apart from work I’m doing on developing a lighter mast and tabernacle (so the mast will swing up into position easily) for a San Francisco Bay Pelican. But the main point of this post is to read more →
No Story about the DuckFlat Spring School is complete without a bit of a spiel about the first of the Mk2 OZ PDRacers being built. It was only one among the 12 different projects – but, hey, it is MY Design!!! (My other designs can be seen by clicking the links in the left column.) read more →
I was asked by the people at Duck Flat Wooden Boats whether I would be interested in teaching at their Spring School. It is their first one for a few years and has the purpose of “getting people excited about boatbuilding”. I must admit that was pretty well how it went. 12 different projects and read more →
polski