Finally I finished the plan for the new OzRacer RV. It is a much simpler build of the original OzRacer concept so will be very attractive to people looking for a first boat. Plans are still the old $20 but even more detail than before. Order the plans for the simple and cheap OzRacer RV read more →
The OzRacer Mk3 has been rebranded as the OzRacer RV.
Detailed plan – a boatbuilding course in a book for $20 each.
So now racing sailors can use the OzRacer Mk2 and cruising sailors can use the OzRacer RV plan. The RV is no slouch though – it won the World titles in 2010.
The first New Zealand Goat Island Skiff has been launched by Ian Howeth.
He has taken a year to build it as spare time became available.
It was launched during the Xmas break
Golfballs go further because of those dimples on the surface. Would it make sense to have those dimples on a boat hull?
It is not quite that simple as this little article attempts to explain.
John Goodman and I sailed the immaculate Goat Island Skiff he built from my plan in the Texas 200.
The boat showed itself to be one of the faster in the fleet despite loading up such a short boat with food, water and camping gear for six days with little outside support.
We played with sailing the boat by the lee – a method used by racing boats to gain both speed and control.
I document the method here including a video showing how the angle of heel can be controlled using the mainsheet.
One of the most important things as a designer or sailor is to keep an open mind, but also to be able to analyze things in light of real experience and prior knowledge.
This article, after a bit of a spiel, goes on to give some great resources that “opened my eyes” at different times in my life.
They focus on areas of structural design, sailing, sail aerodynamics and touch on a bit more.
For the Goose – a first sailing report in moderate winds – and it works.
Also a free plan for a ketch/yawl version, and …
… Michael goes on a bit about the real differences between a ketch and a yawl
First detailed sailing report of the Goose 12ft sailboat.
The Oz Goose is a 12ft sailboat derived from the smaller OzRacer/PDRacer/Brick line. It uses all the same running gear as the OzRacer.
John Goodman who recently spent 5 days semi racing a Goat Island Skiff in the Texas200 event got back to me with some observations and even some pictures of aspects of the boat and the sailing.
I have responded with suggestions to make some further improvements. Between John and me there are some useful tips about setting up a boat for more speed.
However the standard setup of the Goat is fine for most – it is still pretty quick in standard form.
There is advice for both lug and sprit traditional rigs here.
Exciting News, John and David Goodman finished the Texas200 event in their lime green Goat Island skiff.
Five days and 200 miles up the Texas coast dodging huge barges and commercial traffic.
They had a great time and are very happy with the performance of the Goat
John in Texas built his Goat Island Skiff from a kit made by Clinton Chase. They are experimenting with a yawl version of the Goat.
They had a launch and a capsize by the dock.
The boat is a great lime green. I used to have a lime green NS14 dinghy that I enjoyed so much some of the design input went into the goat.
Bruce in New South Wales, Australia has launched his Goat Island Skiff plywood sailing dinghy at Port Stephens.
They had a nice day sailing around but capsized the boat by accident when someone tripped up. Ooops.
I am still not sure who is to blame!
We are still waiting for launch day pics to be retrieved from the waterlogged camera.
The discussion on this topic went on.
Dave asked if people would laugh if they saw a PDR sailing in company with something more conventionally shaped.
Luckily I had a video clip to hand.
A little bit of writing how form in boat design seldom follows function in terms of what “looks good”. It was prompted by a discussion about whether the PDR is good looking or not.
My Podcasts on design also cover this idea to a greater depth – they are in the menu at the top of each page.
OZ Racer plan information The PDRacers have a saga published at Duckworks about the Texas 200 (the 200 mile sailing event up the Texas Coast). It is not by a Ducker but by one impressed by them. Extract The Mighty Ducks clung to the port, with all manner and various sort of other craft abeam read more →
A nice little article by Jackie Monies who is turning into the writer in residence for the PDRacers.
It posits the idea that because of its cheapness, ease of building and the creativity in the group that it qualifies as the “All American Boat”.
Actually I think it is the perfect boat for places that are water rich and cash poor. Anyone can afford to go sailing in these cool little sailing boats. The options of material and design solutions allow the boats to be built of local material just about anywhere. Very cheaply.
This podcast/mp3 talks about why Australian (and New Zealand) wooden boatbuilding is different from the rest of the world..
Click to listen to the talk. This is the third of three.
This is the second of my talks in the USA. It focuses a bit more on construction and some of the methods that can be used to keep a boat light and simple, but very strong and stiff.
It also discusses how there is a “creep” in boatbuilding and design that increases the weight of boats way over what is really needed for a strong structure.
English