Rig Cost Comparison. Freestanding Yawl vs Stayed Sloop

My work quoting rigging kits for customers

One of the bits of work I did for Duckflat Wooden boats from time to time is work out a fitting/rigging list for one of their boats so they can send the full rigging kit to a customer.

This is about 15 years ago now, so prices have gone up, but I am pretty sure the ratio remains pretty much the same.

I have to go through every functional area of the boat and work out the particular items to use so Ducks can look up the prices.

On this particular day I had to work out the rigging for two similar size boats.

Gunter Sloop  $1650 Ropes, Wires and Fittings

The first rig I was looking at today was a nicely proportioned stayed rig – a gunter sloop to be precise.

Anyway – the full kit of bit from various manufacturers, the ropes and so on – all chosen to provide basic adjustment of jib sheets, cunningham eye and boom vang and all the ropes plus hold the mast up and hold the sail and rig together plus the rudder came to about $1650 which included a tiller extension which would be optional – you could always use a PDR type extension and bring it down to $1570. No masts or other spars, no sails – this is just the fitting cost. A similar rig would look something like this.

Freesanding Lug Yawl $380 Ropes and Fittings same quality

Using a freestanding rig with a Balance lug mainsail and a freestanding sprit mizzen the price it came to was $380 for similar quality ropes, pulleys and geegaws. It would look something like this.

Actually – no gee gaws – only 6 blocks and about a mile less rope, no wire or chainplates or jib sheeting gear, or cunningham or vang (as the downhaul does both). This is because most functions are achieved with rope rather than fittings of any type.

Considering that the unstayed traditional rig gives 95% of the same performance if properly set up … this is very much the reason why freestanding masts and the more traditional rigs are such a good idea.

Sloop vs Lug Rigging Time – Advantage Lug

Did I mention that freestanding masts take between 5 and 15 minutes to rig?

Many of the better designers like the two above – Paul Fisher of Selway Fisher and Iain Oughtred offer both choices with many of their boats.

Me – I just stick to the traditional end of things but design in the most important performance improvements of racing boats – but in wood and rope for the most part!

Even further cost reduction for lug rigs

Even further reduction is possible for sails up to 120sqf is possible using the methods we use to set the Oz Geese for racing. We have 70 boats in the Philippines now starting from 5 years ago and these methods are cheap and reliable.

2 thoughts on “Rig Cost Comparison. Freestanding Yawl vs Stayed Sloop”

  1. Love this sort of work. I have bee designing high-tech equipment for so long that not having trade studies done is like leaving the builder to figure out what to do.

    Reply

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.