Goat Island Skiff Videos – at speed carrying weight – GIS planing freely
A small collection of the many videos of the Goat Island Skiff Planing fast in different places around the world.
A small collection of the many videos of the Goat Island Skiff Planing fast in different places around the world.
David Graybeal of Harbor Woodworks in Portland, Oregon built a pair of my wooden paddles from the free plans
See the link in the left column. Simple, but look way nicer than other simple paddles.
I am in the Philippines at the moment.
I took five days out to go to the area where one of my Australian Filipino friends has her hometown. The general area is Laguna, I was staying at Lumban and nearby was a canoe trip to Pagsanjan falls.
I was really interested to see the local boats and to see how they might relate to the timber boats that existed previously. The boats are elegant and very well suited to their environment. Paddling and motor canoes are used on a daily basis.
Gyula, who built the first European OzRacer in 2008 wants to modify it for an outboard motor or an electric trolling motor – calculate output
The new OzRacer RV is a much simpler build of the original OzRacer concept. It also is a direct relative of the slightly larger and much faster OZ Goose
The Finn Dinghy has been one of the most important of the racing classes over the past six decades.
It was always in the forefront of sailing developments.
One fellow contacted asking if there were plans to build a Finn dinghy … and I was able to find a partial answer.
The Quick Canoe Electric is a simple to build cartoppable square back canoe.
It can be quickly and simply built in plywood.
Peter Caspari’s boat is shown here.
The OzRacer Mk3 has been rebranded as the OzRacer RV.
Detailed plan – a boatbuilding course in a book for $20 each.
So now racing sailors can use the OzRacer Mk2 and cruising sailors can use the OzRacer RV plan. The RV is no slouch though – it won the World titles in 2010.
The above photo was taken on the third day of our Canoeing trip on the Loire River in France. The two black canoes didn’t even exist a week ago.
When I wrote the original article on Disposable Canoeing I had no idea at all what it would lead to me and a bunch of adventurers, wine and cheese connoisseurs. Most of us didn’t even know each other! The picture above is the result of this adventurism, but what happened to make it happen?
What technology was involved to make the boats faster to build than most stitch and glue boats and what weather conditions did we have to overcome to make it all happen.
The first New Zealand Goat Island Skiff has been launched by Ian Howeth.
He has taken a year to build it as spare time became available.
It was launched during the Xmas break
John Goodman and I sailed the immaculate Goat Island Skiff he built from my plan in the Texas 200.
The boat showed itself to be one of the faster in the fleet despite loading up such a short boat with food, water and camping gear for six days with little outside support.
We played with sailing the boat by the lee – a method used by racing boats to gain both speed and control.
I document the method here including a video showing how the angle of heel can be controlled using the mainsheet.
How much fibreglass is really necessary to prevent damage to a plywood boat for most users?
For a long time I’ve been suspicious that both designers and builders are in a never ending spiral of more and more heavier fibreglass.
I argue, with data from the Turner designed Jarcat, that the weights of glass are clearly excessive for most uses and users of small boats.
Jack is rather happy with his newly launched Eureka Canoe.
He has built it as a woodworking project over the last couple of years as time became available from his busy architectural practice.
Anyway … a bunch of nice photos and some of Jack’s writing.
Dete Hasse and his family built a Goat Island Skiff in Geelong, Victoria a while ago. He has just written to me about his experiences trying to sail on Port Phillip Bay and more happily on the recently refilled (the drought is over!) Lake Eppalock.
Also he makes some good comments about reefing and how it changes an overpowered boat into a much more rriendly beast in stronger winds.
You can pay money for dry bags to store gear in when canoeing, kayaking or sailing. Or pay even more for buoyancy bags that keep you boat afloat after capsize.
Here Ian tells us how we can make our own cheaply.
Quick Canoe electric is a plywood cargo canoe specifically for an electric trolling motor. 5 to 6mph from a 34lb thrust Minn Kota.
This is a purpose designed low power boat for daytrips and fishing. The plans are $40 and many will be able to build the boat for less than $200.
For the Goose – a first sailing report in moderate winds – and it works.
Also a free plan for a ketch/yawl version, and …
… Michael goes on a bit about the real differences between a ketch and a yawl
A video of the Quick Canoe in action.
My Agent in Hungary who sells plans in both English and Hungarian has launched the first Quick Canoe in those parts. It is designed as a very simple and easy to build boat. It is not a perfect high performance boat, but the numbers have been worked out to give good performance despite the simple shape. It won’t be as good as the best fibreglass canoe, but it will be better than many average ones. And much cheaper and lighter.
The conservative viewpoint is that traditional rigs are not very efficient. However allied to efficient hulls and set up correctly, lug and sprit rigs can be very efficient indeed – not too much slower than “modern” rigs, particularly when the same lessons are applied to trad sails and way cheaper.
This is a WIKI drawn from the group on the Storerboats forum discussions on setting up lug and sprit rigs for best performance building on the information in my webpage.