Home » You searched for rudder » Page 4
All the best material on boat repairs. From restoring old sailing dinghies for racing, fixing holes in canoe, replacing whole hull panels or the neatest and easiest way of doing a really nice texture of nonskid using sugar. And the non skid can be done in paint or varnish
Home » You searched for rudder » Page 4
In the Philippines imported boat parts look extremely expensive compared to local incomes. So we have worked hard to eliminate them as much as possible or replace them. What is easy, cheap and good for racing performance? The result is a big way to save money.
Home » You searched for rudder » Page 4
Kits for Storer Designed Canoes and the Texas Duck which is an Ozracer derived kit.
Home » You searched for rudder » Page 4
The Oz Goose is multipurpose. It can hit speeds of 13 knots, is an excellent trainer and teaching boat with three adults aboard or a family sailer with two adults and a bunch of kids. It is lighter than a Laser Dinghy and a fraction of the cost
Home » You searched for rudder » Page 4
Video – Ian Henehan worked out this 12ft Goose Version and launched it into 20 knot winds. You can check the video to see that this is probably correct. It certainly is, despite the poor camera angle which changes a few times the boat is fairly smoking along
Home » You searched for rudder » Page 4
ReallySimpleSails.com saves $300 or more on your Goat Island Skiff, Oz Goose or Oz Racer.
Custom sails for other boats are also available and will represent a cost saving on your boatbuilding project.
These are full quality sails that we all have worked hard to keep the price down on without reducing quality.
Home » You searched for rudder » Page 4
The new dinghy design is now called the S-12.
Launched into light winds, there’s not a lot to report, but a photo essay. And some comments about the staying of the rig and keeping boats cheap and simple.
Home » You searched for rudder » Page 4
So how does a lug rig boat go in club racing? My designs won’t be outclassed in club racing. I’m really keen to find out how the yardstick (handicap) changes as George and crew get used to the realities of course racing making the boat sail faster. We end up with an estimate of PY – Portsmouth Yardstick for the Goat Island Skiff.
Home » You searched for rudder » Page 4
Slightly arrogant I!
I visit the Philippines then Malaysia and also find a large community of Filipino boat builders there. I find they know much more than me about boat design and varieties. Stunning mix of different boats from curvaceous to plywood and boxy.
But Gosh … the shapes they come up with!
Home » You searched for rudder » Page 4
Malcolm Eggins, boat builder and designer has passed away.
A small tribute to one of the many people that has influenced me and many other sailors and designers. He was a part of the development of Moths, NS14s, VJs, VeeEsses and many other Australian racing dingies as a builder and designer along with his son Darryl. He won several State Championships.
Home » You searched for rudder » Page 4
BETH sailing canoe – The designer has lots of fine things to say about the sailing performance of BETH – but Andrew Barclay has been racing his against mixed fleets in British Columbia where she sails equal with Laser Radials in light wind and gradually outclasses them in stronger.
I provide some tips about getting a bit more from the boat.
Home » You searched for rudder » Page 4
OK … it IS a rant. But it was prompted by the very legitimate question about why have a mizzen sail.
But sadly I descend into a rant about how expense is a really poor predictor of performance.
Home » You searched for rudder » Page 4
Mark Milam has done an amazing job of overseeing a project combining his work with that of a boatbuilder friend. Also the best method I have seen of supporting a windsurfer mast in a sailing dinghy.
Wonderful woods, some great detail design and the very best fitting of a windsurfer rig to a dinghy that I have ever seen.
Home » You searched for rudder » Page 4
Some basic questions were asked on my forum about the design of amas.
There are so many permutation of ama length, crossbeam width, ama volume with performance ranging from very poor to very good. But what are some of the basic criteria?
Home » You searched for rudder » Page 4
List of Kit suppliers for Storer Boat Plans. UK and Europe, USA, Australia, South Africa. Kits make building a Storer Boat even easier.
Home » You searched for rudder » Page 4
The new OzRacer RV is a much simpler build of the original OzRacer concept. It also is a direct relative of the slightly larger and much faster OZ Goose
Home » You searched for rudder » Page 4
The OzRacer Mk3 has been rebranded as the OzRacer RV.
Detailed plan – a boatbuilding course in a book for $20 each.
So now racing sailors can use the OzRacer Mk2 and cruising sailors can use the OzRacer RV plan. The RV is no slouch though – it won the World titles in 2010.
Home » You searched for rudder » Page 4
This is an article about how bias in thinking produces weird results in terms of boat designs.
I compare a silly boat design trend of 100 years ago with modern canting keel maxi yachts.
Personally I don’t think they should be allowed to use engines to run the keels and the various systems – if they do then they should be disqualified from the event results. The conventional human powered boats should be listed as the winners of events.
Home » You searched for rudder » Page 4
A rare beast, a circa 1960s 12 square metre sharpie with some of the original rig is for sale. I am not involved, but in the interests of helping preserve a little bit of Australian sailing and boat design history I would like to help find it a good home.
The 12sq metre (heavyweight) Sharpie came to Australia for the 1956 Olympics. NZ first, Oz second.
However the boat totally changed the approach to the design of Australian skiffs. Thought you might be interested to read my understanding of the design issues and influence.
How the Sharpie name went from the USA to Europe and then to Australia – and how it changed our boats.
Home » You searched for rudder » Page 4
The dot in the bay above is Perttu’s Microcruiser sailboat on a three day trip on the extensive Finnish waterways.
The boat is tiny – 8ft long and is based on my successful OzRacer design (formerly OZ PDRacer)
It is a brilliant concept and sails well upwind and down on inland waters.