WATERCRAFT UK Magazine Article on Goat Island Skiff

Some months ago I was contacted by Pete Greenfield who is editor for Watercraft magazine in the UK.

He wanted an article from me about my favourite boat. At the time I had just returned from a stay at Mooloolaba with my friends Peter and Jo Hyndman who have the Goat Island Skiff that was built from the first set of plans.

Also I have just finished a huge update to the plans as well as moving them over to PDF files so they can be delivered by email. You can order plans on paper, CD or delivered by email from the GIS page on my website.

The boat still looks fantastic after 13 years as you can see from the photos on my website – it hasn’t been repainted or revarnished in that time and has been used heaps by Peter, Jo and their three daughters and their friends. A great testimony to to the effectiveness of epoxy sealing the hull with three coats before painting and varnishing.

Anyway the magazine is out on the shelves. If you have trouble locating a copy here is a link to the Watercraft Magazine website.

That’s the GIS starting a long planing run in the pic right.

In the article I generally rave (my normal rave!) about how mainstream boating has “gone bad” 🙂 and is too obsessed by technical innovation of a particular type. Improvement at all costs – that’s why people are leaving boating/sailing in droves and the smaller clubs are dying out.

At least the rest of us can be involved in real innovation where boats are made significantly better without increasing the expense too much.

I have some pages about setting up cheaper traditional rigs to perform really well with only a small amount of extra expenditure. You can still build one of my boats for less than a shroud adjustment system on a 505 or Sharpie or a hull fitting pack for an NS14 or 420. And that’s the whole boat – on the water.

Related Post

Interview on Net of Designer Michael Storer at furledsails.com Furled Sails - They call themselves the "World's First Sailing Podcast" based in North America. Anyway, last week Christy and Noel called me up cha...
Second interview up on FurledSails.com The first part was up last week.This week we talk about traditional vs modern sailtypes - everyone knows I am a fan of trad rigs because of their low ...
Big Update to the Boatbuilding and Epoxy FAQ (includes some canoe stuf... Yep, Just spent a good three hours whipping up another 14 pages for my website. Mostly additions to my epoxy, boatbuilding and boat design FAQ ...
Podcast online – Michael on why Australian Boats are Different &... This podcast/mp3 talks about why Australian (and New Zealand) wooden boatbuilding is different from the rest of the world. Largely it is becaus...
Podcast Online – Wooden Boat Design by Michael Storer – 1 ... This is a recording of my first USA talk on wooden boatbuilding and design made in Portland, Oregon. I emphasize how the good parts of modern performa...
About boatmik
On the "round Australia trip" I found myself employed by a tiny business in Adelaide - Duck Flat Wooden Boats in Adelaide. It was an eye opener - It became clear that one could build a boat for a fraction of the cost of current racing boats. My ideas hinged around high performance, easy building, fun to sail and reasonably cheap Today Storer Boats are built in all countries and we have active groups on Facebook for the following groups Goat Island Skiff Open Goose Storer Boat plans Really Simple Sails