How do you rig your Goat Island Skiff or other balance lug rigged boat? This page will be useful for everyone, but specifically assist Goat owners in selection of rope, rope lengths and show all the rigging details. We have also found a number of cheaper ways of doing things from our experience in the Philippines. Halyard, downhaul, outhaul, lashings, rope fittings, rudders, centreboard.
Several of the Group were building NACA foils. But the OzRacer and OzGoose Plans have templates for quick and accurate shaping. Making without the templates … several were feeling that they couldn’t make them to a greater accuracy than 1/16th of an inch. So some were suggesting using a CNC machine. The discussion goes on to […]
A discussion about basic pros and cons for swinging centreboards. And dagger centreboards. Centre Board means the board is in the centre. Which is different from a Lee board which is too the side.
Racing shows that what you know is what you know. It doesn’t matter if the boat is less than perfect. So where is it best to put in the effort to improve results. Boat setup, knowing how to adjust for different wind conditions, practicing skills until they become automatic, sailing as much as possible … and teaching others.
The OzRacer RV sailboat is meant to be a very simple boat that can be homebuilt. Most build it to get on the water quickly, but Mark Milam has done an amazing job of overseeing a project combining his work with that of a boatbuilder friend. Wonderful woods, some great detail design and the very best fitting of a windsurfer rig to a dinghy that I have ever seen.
The conservative viewpoint is that traditional rigs are not very efficient. However allied to efficient hulls and set up correctly, lug and sprit rigs can be very efficient indeed – not too much slower than “modern” rigs, particularly when the same lessons are applied to trad sails and way cheaper. This is a WIKI drawn from the group on the Storerboats forum discussions on setting up lug and sprit rigs for best performance building on the information in my webpage.
Bruce in New South Wales, Australia has launched his Goat Island Skiff plywood sailing dinghy at Port Stephens. They had a nice day sailing around but capsized the boat by accident when someone tripped up. Ooops. I am still not sure who is to blame! We are still waiting for launch day pics to be retrieved from the waterlogged camera.
This podcast/mp3 talks about why Australian (and New Zealand) wooden boatbuilding is different from the rest of the world.. Click to listen to the talk. This is the third of three.
This talk is the first hour of my exposition on boat building and design. There are two more parts to come. This covers some of the background and design issues. The second is more on the building side and the last is a bit more about why the Australian (and New Zealand) wooden boat tradition is different from the Northern Hemisphere. You can stream the talks over your internet connection or download them as a podcast.
The first part was up last week. This week we talk about traditional vs modern sailtypes – everyone knows I am a fan of trad rigs because of their low cost – but here I go into the influences on the other side. I love the efficiency of modern rigs so I use all the […]
Interview with Michael Storer on why Australian boats are different.
Fibreglassing 3 – bigger areas – centreboards, rudders, leeboards, keels and larger hull areas requires a different method. Normally glass is draped dry over a clean dry surface and epoxy is applied to the outside and pushed in through the weave.