Dayboat Launch 23ft (6.5m) by Stephen Foster – great photos of a fantastic looking boat.
It is a very simplified hull – basically a square box, but I’ve done my normal trick of making it look rather nice. And Stephen’s clever adaptation of the cabin is just excellent!
So how does a lug rig boat go in club racing? My designs won’t be outclassed in club racing. I’m really keen to find out how the yardstick (handicap) changes as George and crew get used to the realities of course racing making the boat sail faster. We end up with an estimate of PY – Portsmouth Yardstick for the Goat Island Skiff.
Malcolm Eggins, boat builder and designer has passed away.
A small tribute to one of the many people that has influenced me and many other sailors and designers. He was a part of the development of Moths, NS14s, VJs, VeeEsses and many other Australian racing dingies as a builder and designer along with his son Darryl. He won several State Championships.
OK … it IS a rant. But it was prompted by the very legitimate question about why have a mizzen sail.
But sadly I descend into a rant about how expense is a really poor predictor of performance.
Fyne Boat Kits has an excellent reputation for customer service and quality.
I am happy to announce that they will be gradually phased in as the UK Agents for storerboats kits, plans and materials.
The above photo was taken on the third day of our Canoeing trip on the Loire River in France. The two black canoes didn’t even exist a week ago.
When I wrote the original article on Disposable Canoeing I had no idea at all what it would lead to me and a bunch of adventurers, wine and cheese connoisseurs. Most of us didn’t even know each other! The picture above is the result of this adventurism, but what happened to make it happen?
What technology was involved to make the boats faster to build than most stitch and glue boats and what weather conditions did we have to overcome to make it all happen.
John Goodman and I sailed the immaculate Goat Island Skiff he built from my plan in the Texas 200.
The boat showed itself to be one of the faster in the fleet despite loading up such a short boat with food, water and camping gear for six days with little outside support.
We played with sailing the boat by the lee – a method used by racing boats to gain both speed and control.
I document the method here including a video showing how the angle of heel can be controlled using the mainsheet.
One of the most important things as a designer or sailor is to keep an open mind, but also to be able to analyze things in light of real experience and prior knowledge. These are online and paper resources that force thinking in different ways.
This article, after a bit of a spiel, goes on to give some great resources that “opened my eyes” at different times in my life.
They focus on areas of structural design, sailing, sail aerodynamics and touch on a bit more.
Reprint of an article I wrote a few years ago for Watercraft magazine in the UK.
The article points out why I think most of the discussion about boat design being a “compromise” is rubbish and taking that point of view means that the design is sure to be compromised.
What happens if we don’t accept the compromise?
This podcast/mp3 talks about why Australian (and New Zealand) wooden boatbuilding is different from the rest of the world..
Click to listen to the talk. This is the third of three.
Gifted Amateur Boatbuilder Chris Perkins has laboured during some of the most difficult boatbuilding weather to produce the prototype of the new RAID41
We have moved much of our activity to the Facebook Groups. See the links in the Menu above. But there are so many great questions asked and discussed on the Oz Woodwork Forums..
Interview/Podcast with Michael Storer on why Australian boats are different, why traditional rigs have some distinct advantages.
