Video – Ian Henehan worked out this 12ft Goose Version and launched it into 20 knot winds. You can check the video to see that this is probably correct. It certainly is, despite the poor camera angle which changes a few times the boat is fairly smoking along
The new dinghy design is now called the S-12.
Launched into light winds, there’s not a lot to report, but a photo essay. And some comments about the staying of the rig and keeping boats cheap and simple.
A new lightweight 12ft plywood dinghy under development. This prototype by Canadian Rick Landreville. It won’t have a cloud of sail area,but will be light enough low drag enough to hit consistently high speeds relative to other boats of this length.
So how does a lug rig boat go in club racing? My designs won’t be outclassed in club racing. I’m really keen to find out how the yardstick (handicap) changes as George and crew get used to the realities of course racing making the boat sail faster. We end up with an estimate of PY – Portsmouth Yardstick for the Goat Island Skiff.
Slightly arrogant I!
I visit the Philippines then Malaysia and also find a large community of Filipino boat builders there. I find they know much more than me about boat design and varieties. Stunning mix of different boats from curvaceous to plywood and boxy.
But Gosh … the shapes they come up with!
Malcolm Eggins, boat builder and designer has passed away.
A small tribute to one of the many people that has influenced me and many other sailors and designers. He was a part of the development of Moths, NS14s, VJs, VeeEsses and many other Australian racing dingies as a builder and designer along with his son Darryl. He won several State Championships.
BETH sailing canoe – The designer has lots of fine things to say about the sailing performance of BETH – but Andrew Barclay has been racing his against mixed fleets in British Columbia where she sails equal with Laser Radials in light wind and gradually outclasses them in stronger.
I provide some tips about getting a bit more from the boat.
Mark Milam has done an amazing job of overseeing a project combining his work with that of a boatbuilder friend. Also the best method I have seen of supporting a windsurfer mast in a sailing dinghy.
Wonderful woods, some great detail design and the very best fitting of a windsurfer rig to a dinghy that I have ever seen.
Fyne Boat Kits has an excellent reputation for customer service and quality.
I am happy to announce that they will be gradually phased in as the UK Agents for storerboats kits, plans and materials.
Some examples of sailing nicely in the Goat Island Skiff, reversing, sailing at nice speed in comfortable conditions.
Locations are San Diego, Australia, Texas, Florida and Maine
This OzRacer mk2 has a number of changes from the original design, but Bob has pulled it off. The biggest risk is that the windsurfer mast might break because it is not meant to be supported in this way – it is meant to be held up higher by the arms of the sailor.
In general I don’t like most sailing books and most sailing lessons.
I think that a learner doesn’t need to learn many new words. Also because they don’t explain the correct principles in the beginning their explanations become really complicated.
If you understand how to use a sail to get power – when it is at maximum power and when it isn’t it all becomes very logical.
List of Kit suppliers for Storer Boat Plans. UK and Europe, USA, Australia, South Africa. Kits make building a Storer Boat even easier.
A problem with a single leeboard is after a capsize there is a 50% chance of it being out of reach. Here is a method of setting up a rope to help right PDRacers and OzRacers when the leeboard is out of reach. The nice thing about the OZ series is that all the boats come up with very little water inside when righted from capsize. Also the wooden mast doesn’t allow the boat to turn completely upside down.
The new OzRacer RV is a much simpler build of the original OzRacer concept. It also is a direct relative of the slightly larger and much faster OZ Goose
The OzRacer Mk3 has been rebranded as the OzRacer RV.
Detailed plan – a boatbuilding course in a book for $20 each.
So now racing sailors can use the OzRacer Mk2 and cruising sailors can use the OzRacer RV plan. The RV is no slouch though – it won the World titles in 2010.
In the late 70s as a sailing teenager I drew boats on every available paper surface.
A new book “a lighter ton” describes the exciting development of racing yachts to create newer, lighter, faster and cheaper and FUNNER boats.
Many of the developments were from New Zealand designers such as Bruce Farr, Paul Whiting and Laurie Davidson. A new book by Richard Blakey covers this exciting experimental period in yacht design
The above photo was taken on the third day of our Canoeing trip on the Loire River in France. The two black canoes didn’t even exist a week ago.
When I wrote the original article on Disposable Canoeing I had no idea at all what it would lead to me and a bunch of adventurers, wine and cheese connoisseurs. Most of us didn’t even know each other! The picture above is the result of this adventurism, but what happened to make it happen?
What technology was involved to make the boats faster to build than most stitch and glue boats and what weather conditions did we have to overcome to make it all happen.
The first New Zealand Goat Island Skiff has been launched by Ian Howeth.
He has taken a year to build it as spare time became available.
It was launched during the Xmas break
More videos of John Goodman’s Yawl Rigged Goat Island Skiff.
He is trying out some rigging variations to see if we can simplify the building of the yawl rig version.
At the moment this is inconclusive, but wow, he got some good videos