I hate silicon sealant on boats – Silicon contamination a world of pain. And finally a fix!

Many of the yukkiest, most pointless, timewasting activities in boat building and repair are all down to the use of silicon sealants.

Generally if there is a leak some handyman type will try and fix it with this awful stuff. Leading to a contamination problem that will bite you on the bum for years down the boat owning road.

Don't use silicon sealant on boats EVER! storerboatplans.com

It is absolutely fine in bathrooms and houses but it just does not belong on boats.


Why I hate silicon sealant on boats!!!

You can’t $#@* paint it.

You can’t $#@* sand it.

It doesn’t $#@* stick well enough to be structural or to stop boat type leaks in its own right

It doesn’t $#@* stick poorly enough to be easily removed.

When the thinners from paints hit it they spread its $#@* unpaintability to nearby areas which it hasn’t $#@* contacted directly. YOu can the wash and sand to try and get rid of the $#@* residue and it just spreads it over the whole area so that the paint bubbles or draws back from silicon residue in an intermittent sort of way.

The only place it works is underneath fittings that are bolted or screwed to the boat – but ONLY on boats that will never be painted – even fibreglass boats may be painted one day – so what boats could they be?

Use a polyurethane sealer like sikaflex or 5200.  It can be sanded, painted and it doesn’t really cost much more.  It also seals gaps in a structural way – so if the bits move relative to each other it will still keep on working.

In fact you can glue a whole boat together with sikaflex – not that I’d recommend it – epoxy does a better job in most cases – but there are places…

Disclaimer – if I sound bitter it’s because of bitter experience. I worked as a professional boat painter and varnisher over several years – silicone sealant was the #1 reason for having to redo work that we thought was finished and for quotes blowing out in a massive way.

If you think I am alone in this … read this google search on the silicon contamination problem to see the vale of tears where silicon sealant is responsible. From classic car restoration, to furniture repair, to boats and beyond

 

Related Post

Q&A Epoxy Preservatives that “Soak into” the wood. CP...   "Soaking" Epoxies - not so good Generally the thinners based products were a precursor to the full high solids epoxy catastrophe (and I mean ...
Q&A Preventing Rot – The Good, the Bad and the Fugly This was as a response to the idea that one should chuck a handful of salt into interior areas of a boat to prevent rot. Not a good idea. Th...
How to remove OIL and DIESEL that has soaked into Timber or plywood. W... An old boat has oil or diesel residue soaking the hull making painting or repairing difficult A common problem with restoring or repairing an older b...
Podcast Online – Wooden Boat Construction by Michael Storer R... This is the second of my talks in the USA. It focuses a bit more on construction and some of the methods that can be used to keep a boat light and si...
Q&A – Painting and Varnishing Epoxy Paint vs Varnish Paint is more durable and will protect the epoxy and timber the best. Varnish hides a rough surface better.  If you have done...
Q&A – Saving time by precoating plywood sheets with epoxy. If ply sheets are precoated it saves lots of time. It is easier to coat areas on the flat Gravity works with you to keep the coated surface ...

Leave a Reply

Be the First to Comment!

  Subscribe  
Notify of