Perttu Builds a Plywood Quick Canoe in Finnish Snow

Some pictures from “Pepe” (who we know as Perttu in Finland) off the PDRacer forum who is building his Quick Canoe in tricky conditions.

I find it hard to wrap my mind around it!!! Those guys (meaning all the far northern hemisphere builders are tough boatbuilders.

The Quick Canoe comes out of two sheets of 6mm plywood and is designed to be a very simple plywood canoe that works OK

Before the keel is added there is a metre of snow each side.

Perttu building a Quick Canoe in Finland

After the keel and seats are added there is still a metre of snow.

Perttu supplied me with some feedback that the duct tape is not quite strong enough in cold weather to hold the front of the boat together, though it is OK along the sides.  So I have modified the plans with a simple improvement.

Snow everwhere but the resin and plywood have bonded to make the canoe.

Perttu’s pictures of building the plywood Quick Canoe in Finland during winter

Quick Canoe Plans info and links to Agents

Related Post

About boatmik
On the "round Australia trip" I found myself employed by a tiny business in Adelaide - Duck Flat Wooden Boats in Adelaide.It was an eye opener - It became clear that one could build a boat for a fraction of the cost of current racing boats.My ideas hinged around high performance, easy building, fun to sail and reasonably cheapToday Storer Boats are built in all countries and we have active groups on Facebook for the following groupsGoat Island Skiff Open Goose Storer Boat plans Really Simple Sails